Simulation Settings - [source code]
Configure simulation control settings for UMF. OutdoorPlus
Input
| Name | Nickname | Description |
|---|---|---|
| WriteInt | Write interval in time steps. Optional; uses solver default if omitted. | |
| Format | Write format: 0=ascii, 1=binary, 2=compressed. | |
| CPU | Number of CPUs/subdomains to use. Optional; default is 1. | |
| SolidStep | Initial solid time step factor for UMF controlDict. Optional. | |
| MinDT | Minimum time step between iterations. Optional. | |
| MaxDT | Maximum time step between iterations. Optional. | |
| MinFI | Minimum fluid iterations per time step. Optional. | |
| MaxFI | Maximum fluid iterations per time step. Optional. | |
| PcForm | 'pc-based' or 'mixed' (default is pc-based). | |
| DampThk | Blending coefficients: damping thickness. Optional. | |
| AlphaU | Blending coefficients: alphaCoeffU. Optional. | |
| AlphaT | Blending coefficients: alphaCoeffT. Optional. |
Output
| Name | Nickname | Description |
|---|---|---|
| Settings | Simulation control settings. |